DC175 is the heavier-duty sibling of DC135 — same cam-action geometry, same surface-mount arm, but built for wider and heavier leaves up to 44 inches. The strength range steps up to EN 3–6, which covers oversize residential entries, multi-family corridor doors, and the high-traffic openings in office and hospitality projects where the leaf cycles thousands of times per week. The default surface closer once the leaf gets large enough that DC135 is being run at the top of its strength range.
Same cam-action geometry as DC135, but with a heavier-section body and larger spring — handles leaves up to 44 inch wide and the higher cycle counts of office and hospitality use.
Field-adjustable across EN 3, 4, 5, and 6. The 5 and 6 sizes are needed on oversize entries (44 inch+) and on doors exposed to draft loads from corridor pressure.
Tested to EN 1634-1 for FD60 fire-rated leaves. Same certification chain as DC135 — drop-in replacement where the leaf size has grown.
Oversize residential entries (>38 inch), multi-family corridor doors, office and hospitality interior doors with high cycle counts. The default surface closer once DC135 is undersized.
DC175 is the heavy-duty cam-action surface closer in the CamMotion family — sized for residential entries, multi-family corridors, and commercial openings up to 1100 mm. Mounting variants and accessories are coordinated with the door schedule.
| Type | Surface-mount · Cam-action · Heavy-duty |
| Strength | EN 3 / 4 / 5 / 6 (adjustable) |
| Door width | Up to 1100 mm (43.3") |
| Door weight | Up to 120 kg (264 lb) |
| Mounting | Standard / Parallel arm / Top jamb |
| Closing speed | Adjustable · independent latch speed |
| Backcheck | Adjustable · 75°—115° |
| Delayed action | Available |
| Fire rating | Up to FD60 (EN 1634-1) |
| Standard | EN 1154 · CE marked |
Tell us the leaf width, weight, traffic level, and any fire rating. We'll spec the strength size, the mounting variant, and confirm the certification chain to permit.
Inquire about DC175